ここから本文です
TWO:"Not much, I reckon. She's a very low-class sort, and not at all young."Besides, what was the use?it was only for a few months, and then Harry would be in a little house of his own, living very like his father, though more dreamily, more delicately. Then Mrs. Backfield would once more wear muslin aprons instead of sacking ones,[Pg 35] would sit with her hands folded, kid shoes on the fender.... Sometimes, in the rare moments they had together, Harry would paint this wonderland for her.
Classification by type of system
1natural circulation external heating pipe type
2natural circulation calandria type
3forced circulation type
4falling-film type
5rising film type
6jacket type
7coil type
Classification by method of operation
1single effect evaporator system
2multiple effect evaporator system
3auto-vapor mechanical compression system
4auto-vapor ejector compression system
5multistage flash system

After taking into consideration of the physical and chemical property of solutions, the desired design conditions, and available utilities, we select the most suitable type of system by utilizing our years of experience and excellent results.
In addition, we can offer designs and manufacturing services that take into careful consideration compactness, energy-efficiency, and automatization.

THREE:"You're tiredyou'd better go to bed," he whispered, and she at once gladly rose and slipped away, though she would not have gone without his suggestion.The chapel, during all the tumult, was unnoticed, probably less through respect for the place, than from neglect; and thither those who had most to fear from the people had hastened, expecting safety from the sacredness of the spot. Among the rest, or rather leading the way, went Sudbury, who was shortly afterwards joined by the constable and treasurer, on perceiving the commons in possession of the Tower.

While standard calandria type evaporation systems are widely used as the typical concentration evaporator by the various food and chemical industries, we have delivered many of those systems as finishing concentration evaporators especially for sugar solutions and starch syrups.

THREE:
  • Enables flexible operation with little influence from variations in load and raw solution concentrations because of an adequate amount of solution being held within the system. These systems are also suitable for batch type burning evaporators.
  • Concentrations can be controlled within product specifications by the cascade control using the concentrations of concentrated solution and the raw solution supply and also by the arithmetic control of raw solution concentrations, etc. (Result for sugar solutions: 75±0.2wt%)
  • High-viscosity solutions and solutions that may crystallize can also be utilized by installing a propeller in the evaporator as a forced circulation system.
THREE:"Because, though all those things have happened, you're holding your head up still."

This is a process example of a device that continuously and simultaneously concentrates two types of waste liquid with a single high-efficiency steam compressor.

THREE:The year passed, and the new year came, showing the farm still on the upward struggle, with everyone hard at work, and no one, except Reuben, enjoying it particularly. Luck again favoured Odiamthe lambing of that spring was the best for years, and as the days grew longer the furrows bloomed with tender green sproutings, and hopes of another good harvest ran high.
  • By evaporating the steam using a mechanical compressor and reusing it, almost no heating steam is alomost required except the time of start-up, so large energy savings can be expected.
  • By combining with a thin film falling heat exchanger that does not raise the boiling point due to the liquid depth, it is possible to utilize the temperature difference of the compressor at the maximum.
  • Since the residence time and heating time are short and the holding amount is small, starting and stopping can be performed in a short time.
  • It will prevent scale adhesion in the can that the evaporator is divided into two parts, and that the supply of the undiluted solution is alternately switched over a fixed period of time to perform heat concentration.